Not all mobile devices reproduce the sound equally loudly - for some, the ringing sound of the call is too quiet, while for others, the sound switched to the headphones exceeds all permissible limits. How to cope with this imbalance, and equalize the sound? Can this be done without visiting a service center? Let's figure it out.
Any gadgets on the Android OS have such a flexible control system that they can be changed beyond recognition - customized, thereby opening the widest range of hidden features, and customizing any functionality of the system, including sounds. Not all basic assemblies are perfect, sometimes the sound reproduction of the device's speakers does not work correctly - in some applications it can reach the maximum value, while in others it is barely audible. You can adjust the speakers in a variety of ways - both standard and using the menu of special settings or applications.
All devices have a standard key for volume control - usually it is located on the side panel. By clicking on it, you can set the desired parameter. But if this does not suit you, then you can do it from the main settings menu. Here you can make settings for any application, set a ringtone for a particular contact.
To change the default sound, you need to do this:
This will result in the same pitch for all apps and calls. But if you need to change specific values, for example, for incoming voice calls or messages, then you need to do this in the "Sound Profile" section in each of the necessary applications.
This method is suitable for advanced users who, in case of failure, will be able to return all the standard settings back. But! Each model has its own commands to call this special settings menu:
After dialing and pressing the dialer button, you get to the engineering menu, where you can adjust the desired parameters.
There are other parameters, but it is better not to touch them at all:
Each of these modes has its own subtle settings, and in order to understand what's what, here is a standard list of Type sound adjustments:
There are several settings to set the desired sound - from level 0 to level 6. With each press, the level increases, and in order to save the set value, it is erased from the cell and a new one is written, which you see during setup. But! Observe the range: it can be between 0 and 255, and the lower the number, the lower the sound will be played. After making changes, press the Set button - it is located on the same line with the cell being changed, and exit the setting by pressing the dial button.
Tips: before changing the default settings, write down all the values on a piece of paper - this can come in handy if you overdo it and set the wrong parameter, for example, playing sounds too low.
For many users, when recording a video, the sound turns out to be incorrect, that is, either too quiet or loud. To fix this, go to the engineering menu by typing a command for your smartphone (see above):
If you don’t want to bother with fine-tuning the device, then you can use special applications. You can find a lot of them both in the Google store and on the Internet. Remarkably, the soundtrack can be increased by about a third, and the speakers will work absolutely fine, without wheezing and tears.
Utilities are recognized as the most popular, and it is best suited for tuning low frequencies.
But the Android OS version must be higher than 2.3, otherwise they will not be able to perform their functions.
Everything is very simple, the software works according to the same principle - an equalizer appears on the screen, where you can make the desired sound settings.
Now you know how to increase the volume on Android or, if necessary, adjust the sound and speaker sensitivity.
About 15 years ago, one could only dream of using an ordinary home computer as a means of video communication. Indeed, before our eyes, the predictions of science fiction writers have become a reality. You will not surprise anyone with the appearance of a microphone connected to a computer - this rather specific device. For a long time, the ability to connect it was in demand by various musical groups of amateur enthusiasts (what is the support for the ASIO protocol), but gradually the situation has changed.
Currently, every self-respecting laptop manufacturer integrates a microphone and a video camera into the product without fail. The reason was a significant reduction in the cost of computer equipment, which made it accessible to everyone, as well as attractive price offers from Internet providers. The appearance of the famous Skype (Skype), which supports full-fledged video communication, and in the future, other similar programs, created the necessary software foundation.
Not surprisingly, many users of such applications, and part-time owners of video cameras and microphones, are so eager to learn how to increase the microphone volume. The problem of hearing the interlocutor has existed for a long time. The developers of programs that interact with the microphone are constantly improving the mechanisms for capturing and transmitting sound, so there are usually no problems with how to increase the volume of the microphone. Increasing it is one of the easiest ways to increase audibility.
Why is it good to hear from one microphone and bad from another? It's all about sensitivity. It is she who determines how quiet the sound can catch the device. The principle of operation of such devices is based on the conversion into an electric current, subsequently amplified.
There is nothing complicated about the microphone. If the drivers are installed correctly, then in the Windows operating system, next to the clock, an uncrossed speaker icon is displayed. Having placed the cursor on it, you need to press the right mouse button and select "Recording devices" in the menu that appears. From the displayed list of devices that support recording, you must select "Microphone", usually it is the top one. Select it and click the "Properties" button. Next, go to the "Levels" menu. By moving the slider left-right, you can, respectively, decrease or increase the gain, increasing the audibility of the sound transmitted by the microphone. It should be noted that Microsoft deliberately set the gain to 66%. A setting that is too high will result in rattles, while a setting that is too low will result in poor hearing.
Here you can also select the "+20dB Boost" parameter. This is a software gain, measured in decibels, in addition to the slider control above. It is recommended to enable "boost" and reduce the volume.
Now any user can figure out how to increase the microphone volume. However, despite this possibility, when buying a separate device, it is recommended to refrain from purchasing too cheap models.
If your microphone is poorly configured and you are hard to hear, then in Windows 10 you can increase the microphone volume. You can increase the microphone volume on Windows 10 in the sound manager or in the recording devices settings.
The sound manager can be Realtek, Media or some other depending on the motherboard. You can open the sound manager through the Control Panel which is launched by clicking the button Start -Windows Tools - Control Panel.
How to increase microphone volume on Windows 10
In the Control Panel, click on a category Equipment and sound and at the very bottom find and click on the sound manager, I have it Realtek HD Manager. If you do not have such a dispatcher, then you do not have all the drivers installed.
Microphone settings in Windows 10 are done in the sound manager In the sound manager, go to the Microphone tab. Move the recording volume slider almost to full. Then click on the microphone gain icon.
How to set up microphone on windows 10 laptop A slider will open with which you can amplify the microphone on Windows 10, move it to 20 dB and close it by clicking on the cross. Then click OK.
To open the parameters of recording devices, you need to hover over the sound icon and press the right mouse button.
How to turn on the microphone on a Windows 10 computer A menu will open in which select the item Recording devices.
How to check the microphone on Windows 10 A window called Sound will open on the tab Recording. In this window, you will need to select Microphone and press the button Properties.
How to make the microphone louder on Windows 10 A window called Microphone Properties will open. In this window, go to the tab Levels. With the first slider you can adjust the microphone volume on Windows 10, move it almost to full, and with the second slider you can adjust the Windows 10 microphone gain, move it to the 20 dB position. Then close all windows by clicking OK.
You start recording video from the monitor screen. Recorded, start checking. And during the test, you notice that in the middle of the video, the sound of your microphone has dropped to a minimum. What is the reason? In this post I will tell you how to solve this problem.
Hello. I encountered the problem described above while recording a video course. Because of this trouble, I had to re-record the same lesson ten times. I also reinstalled programs that record video from the screen. But in the end, I found what the problem was.
It should be said that I use the Windows 10 operating system. I did not check, perhaps other versions of Windows have this setting. The fact is that there is such a setting that allows third-party programs to adjust the volume of your microphone without asking you.
It happens like this:
You start writing video from the monitor screen, and at this moment you have, for example, Skype turned on. Skype has a setting that controls the volume of the microphone. So, you are recording a video, and Skype decided that the volume needs to be turned down, and it turns it down. This can be done not only by Skype. I had this "spoke in the wheel" inserted by an audio editor that I included to show how to clean up the sound on the video. This editor, too, without much ceremony with me, reduced the volume of the microphone. What made me furious and bewildered.
I searched for information on the net, but it offered options such as turning off the volume control function in Skype. But, at that time, I didn’t have Skype installed at all, which completely confused me. Well, in general, rummaging through the settings, I still found this ill-fated setting.
Solution.
After reboot, check these settings. If "Exclusive Mode" is disabled, then you're done. You can start recording video.
Below is a video that shows me how to do it. Ah, that's all. I hope this note was helpful to you. I wish you success!
With a weak audibility of sound, subscribers can note when communicating through VoIP telephony or other players in online games, the sound level may be weak when playing a screencast that has just been made with a voice recording or sound from a microphone. The reason for the weak sound signal coming from the microphone on Windows devices lies not only in the low quality of individual budget models of microphones, systems hands free or webcams. Alas, the successful installation of an audio driver into the Windows operating system does not yet mean the optimal settings for the signal level coming from the microphone.
As a rule, only functional programs offer access to the microphone settings. For example, in a powerful audio editor, options for setting up sound recording are placed on the program toolbar. Right on the toolbar you can assign the required microphone signal level, select a recording device if there are several microphones connected to the computer, decide on mono or stereo sound for future recording, etc.
Low-functional applications that work with sound rarely provide tools for adjusting the microphone signal. So, for example, a standard Windows 10 application, which, it seems, Microsoft has gone too far with minimalism, after launch, will shift the entire focus to the sound recording start button.
Nevertheless, the microphone settings present in the application will be taken to the section of the regular application by the link "Options", where what you can do is either allow or not allow installed applications to use the microphone, and if allowed, install a list of such applications. But we will not find any settings for the signal coming from the microphone.
Some sound settings are available inside the desktop Skype: in the program settings section, you can select and apply specifically to Skype one or another microphone for communication, if several are connected, and set the signal volume.
As you can see, the settings of individual applications that work with the microphone will not always help to solve the problem with a weak signal. It is much easier to adjust the microphone sound once in the Windows sound system settings and not be distracted about this in each individual program.
So, we have a microphone connected to a computer device based on the Windows operating system, we have a problem with a low level of its signal when working with voice communication services or when recording audio or video. To amplify the sound of the microphone, we need to get into the section of the Windows sound system settings. There is a volume icon in the Windows system tray, call the context menu on it and select .
A window with sound settings will open on the tab we need with a list of recording devices connected to the computer, i.e., microphones. Only one of them, if there are several, will be assigned as the default recording device in the system. We make a click on it and press the properties button at the bottom.
An additional window of the properties of the selected microphone will appear, where we are interested in the tab. Here, in this tab, the microphone signal level is adjusted by moving the slider along the volume scale or along the gain scale located below.
The preset low value of the microphone gain in most cases is the reason for the weak audibility of the sound. For optimal audibility, it will be enough to drag the slider to +20 dB, since a higher value will naturally result in annoying noises from the increased microphone volume. But even with a slight amplification of the microphone to +20 dB it is better to additionally set the noise suppression option. It's in the next tab. The noise reduction option will only be available when all other sound effects are turned off.
Alternative ways to access system sound settings.
In rare cases, there may be no volume icon in the system tray.
As a rule, these are cases of manual intervention in the settings of the Windows taskbar notification area or audio driver failure. In the latter case, of course, it is better to update the audio driver or reinstall it altogether. But if there are no problems with sound, and instead of the volume control in the system tray, the hardware buttons of the speaker system or multimedia keyboard are used, the solution to the problem can be postponed for a while by getting into the system sound settings in alternative ways.
You can open the sound settings and get to the microphone options using the Windows Control Panel.
Versions of Windows 7, 8.1 and 10 allow you to get to any section of the system settings using an in-system search. In the version of Windows 7, the keyword must be written in the search field of the menu "Start".
In-system search in Windows 8.1 appears when accessing charms by tapping the right edge of the screen or pressing the Win + Q keys.
The same shortcut combination for in-system search is also available for Windows 10, but in this version of the system, clicking the search field will be much easier, since such a button is next to the menu button "Start".
