When a new TV shows in black and white, first of all, it is recommended to contact the warranty service center (if the device was purchased from official distributors). In accordance with the sales contract, they are obliged to solve the problem, replace the broken ones with original spare parts taken from their own warehouse, or completely change the equipment.
The screen of the new TV does not show correctly if the connection is incorrect. Plug colors match their purpose:
Factory marriage also causes the appearance of black and white frames.
The appearance of some black and white channels on the TV indicates outdated software. The human factor does not actually play any role here, except that you can forget about updating the firmware. Modern equipment itself finds the source of the problem and prompts the user to upgrade. You only need to click "OK" and wait a while.
Older equipment does not update itself. You will need to search for the necessary software on the Internet yourself, download it to a flash drive and update it manually.
If the TV has become black and white, you need to check the color reproduction in the menu using the remote control. This approach is logical if all channels show the same. When only one of them is devoid of color, then it's not your technique. It is necessary to call the operator of the company providing the television so that they can debug the normal operation of the transmission.
Also follows check antenna. Its signal is damaged in many cases:
When the settings go astray regularly, qualified intervention will be required. Troubleshooting your Sony or Philips on your own will not be possible without the proper skills. Also, do-it-yourself TV repair is hazardous to health, since some nodes accumulate a charge and give it out when touched.
Our service center "TVF" is open daily from 8 am to 10 pm without days off and holidays. Masters provide professional services, they understand both the software of modern equipment and its technical component. It is possible to apply for the departure of a qualified specialist via the Internet. Diagnostic procedures are carried out at home, then the professional starts work on repairing, updating software, and flashing the device. Most importantly, we provide a guarantee, because we are confident in the qualifications of our employees, the quality of parts and the performance of the tools used.
In the section on the question Why are DVD movies shown in black and white??? given by the author cut through the best answer is So so... There are many ways to transmit a signal to TV, encodings, you need to find out what your TV supports, what encoding (NTSC, PAL, SECAM), if PAL is in the settings, which is likely to be black and white, then you need to set the settings to on the DVD itself, according to the encoding of this signal (better, of course, NTSC, but not a fact), it often happens that the AUTO mode is present in the settings (I have it set).
Now the way to connect DVD to TV. SCART connector or just "tulip" ... It is better to use the second method if the TV is not very "advanced", since there are optical transmission methods, and RGB, which is better, but not supported everywhere ...
In general, knock on the PM, throw off the photo of the TV and DVD connectors, I will help in any way I can ...
Answer from 22 answers[guru]
Hello! Here is a selection of topics with answers to your question: Why are DVD movies shown in black and white???
Answer from chevron[newbie]
Hello skills DVD shows black and white what to do please help model TV SONY KE-P37M1 DVD model Samsung E360
Answer from Technical Support[guru]
It may be a TV, you can try with PAL, SECAM and NTSC settings! And it is also possible that the DVD is connected to the TV incorrectly, the TV has several ways to connect external video devices RGB, AV, SCART, try them all!
Answer from Yoman Pinchuk[guru]
Well then replace it
One of the problems that arises when connecting a digital set-top box to a TV is the lack of color, that is, there is an image, but black and white. The problem may arise both when connecting a DVB-T2 receiver and a satellite/cable receiver. Typically, this happens when you connect the receiver with an RCA cable, which is commonly referred to as "tulips". The main reasons for the lack of color: incorrect connection or incorrect color mode in the TV settings.
A number of TVs, especially some Samsung and Philips models, do not allow you to directly connect a T2 tuner to a TV with "tulips", because there is simply no composite RCA connector. In this case, most often there is a rarely used component connector. In the composite, only one wire is used for video transmission and it is standardly yellow. The component version uses three cables for the video signal: red, blue and green. In modern TVs, this input is often made universal, in such cases the green component jack is circled in yellow. The picture shows the correct connection of the RCA cable in this case.
And here is an image of a purely component input, where there are no yellow connectors at all. If you connect a yellow tulip to the green input in the same way as in the previous picture, you will get a black and white image. There is only one way out: either look for a regular composite input on the TV, which can be located on the side or on the front of the TV, or use the SCART or HDMI connectors and the appropriate cable. There is also a series of Samsung TVs, where RCA and SCART analog inputs are implemented through special adapters that come with the TV. But it happens that adapters are not initially used and are simply lost over time. Then you just have to connect the set-top box only via the HDMI input, which is implemented without any "tricky" adapters.
The reason for the black and white picture may be a color system other than PAL manually set in the TV settings. In this case, you need to find the color system control in the TV menu and set the auto mode or PAL mode. It is in this mode that digital set-top boxes broadcast the video signal by default.
I think I'm dumb. I don't know how to connect DVD to TV. TV - Philips 5th generation, like this - http://holodilnik.ru/audio_video/lcd_tv/philips/32pfl5404/down_payment/
DVD - Sony, not a player, but a recorder, that is, with a full range of various functions. It was connected to another TV without problems, now I need to connect it to this one, but I don’t understand how. The cord is a tulip (it seems to be called that), on the TV - 4 outputs, on the cord - 3 multi-colored pieces. Maybe another cable is needed to connect?
The ambush is that I can not check whether it is connected or not. There is no identification button on the remote control to switch to video mode.
Already going to the store with this remote control to go, but maybe not a disgrace?
Usually yellow is video, white and red are audio.
The TV should have a button of the Source type (Source), when pressed, it shows the active input channels in brighter colors (TV antenna, external, HDMI, USB, etc.). Play around, do not break, everything should work.
PS: When choosing a signal DVD must be included in the network.
Quote:
There is a Source button on the TV remote control, I wrote about it. Read carefully what I wrote earlier. In addition, in the TV manual, if it is not in Swahili, it should be written (and even drawn) how to connect DVD and other devices.
Hello. I can not connect the DVD to the TV. Says no video signal. TV philips-37PFL5405H60. I tried to connect it like to a regular TV, through tulips, but the TV does not have a video connector. I tried to connect a laptop to the same TV via VGA and 2RCA (they said you need these), there is also no video signal. How to connect anything to it to watch discs?
same problem! we connect a DVD to the TV, the sound goes normal and there is no color at all, it shows in black and white I connect via coaxial (three connectors). On the DVD player panel: yellow in TVout, red and white respectively in Audio. On the TV panel: yellow in Y, red and white, respectively, in Audio L / R ... There is no scart connector on DVD ... and the instructions for the TV only describe connection via scart ...
Quote: Well, why are you suffering? Buy a Tulip-Scart cable or a Tulip-to-Scart adapter.
Quote:
(Some strange connection. In addition to Y, there should also be B "and R" on the TV; but if there are no similar outputs on DVD, then there are no options without SCART).
This, if I understand correctly, the video signal is input to the Y-channel of brightness, in this case there will be no color.
P.S. If you are sure that the connection is correct, then you need to go to the TV settings. See which color system is selected. It is necessary to set "auto" or "fall".
Oh, tell me, please, stupid :) I connected the Home Cinema to the TV. Telek Toshiba, dom.kin.Sony, the flash drive reads normally, the sound is 5.1. everything is cool, but the sound from the TV does not come, or only through the speakers of the TV set. I would like to hear the sound through the speakers At least 2.0, but it is through the acoustics. I connected the optical cable and nothing, what to do? already tired :(
Quote:
I understand correctly that connect both a flash drive and an antenna to the Toshiba TV, and the sound on the "receiver + speakers" comes only from the flash drive?
Maybe in the TV menu you need to choose acc. sound output for this?
If there are tulips / scart on the TV and on the receiver, try through them.
Please tell me. I can't figure out how to connect a DVD player (BBK) to a Smsung LED TV set, the fact is that there are no tulip outputs on the TV set. I bought a tulip-scart adapter, the telly sees some kind of connection (the field is active in the menu), but when I select it, it says that there is no signal. I don't know what's wrong. Can anyone come across, tell me.
